CadTools and xTurn (Vehicle Turning Software) Forum

CadTools General Category => CadTools General => Topic started by: Steve b183 on March 11, 2016, 02:11:12 PM

Title: vehicle Turning Simulation
Post by: Steve b183 on March 11, 2016, 02:11:12 PM

hi Lars

Vehicle Turning Simulation, I've created a vehicle that I require a swept path for, the trailer is quite a bit wider than the cab unit with wheels 3.0m width and a body of 4.2m width

my question is when entering the data into #2 boxes for vehicle and wheel widths the values reset to those of #1

am I missing something here as it looks like I can do what I need but some things not right

steve

Title: Re: vehicle Turning Simulation
Post by: Lars on March 11, 2016, 03:05:52 PM

That seems to be a bug. I'll look into that!

Title: Re: vehicle Turning Simulation
Post by: Lars on March 12, 2016, 01:13:06 PM

This issue is fixed in the latest update (709). Also fixed in latest update of: MSTurn, IntelliTurn and BricsTurn

Title: Re: vehicle Turning Simulation
Post by: Steve b183 on March 31, 2016, 04:50:53 PM

Hi lars

i'm still having trouble with this, the vehicle widths #1 and #2 seem ok

but now all the other values for F and F2...WB and WB2 .....B and B2 .........all reset to the same values for some reason

i'm confused as i'm sure I checked it and it worked fine but not now


also, another query, say I have created a custom vehicle which I've saved, is there a way to transfer this onto another machine so I can load it .........or is it a case of entering the details again on the second machine ?

steve b

Title: Re: vehicle Turning Simulation
Post by: Lars on March 31, 2016, 05:28:28 PM

All vehicles that you add get saved in same file as you have open. You can copy the file to another computer

Title: Re: vehicle Turning Simulation
Post by: Steve b183 on April 08, 2016, 04:49:52 PM

hi lars

you didn't answer the problem i'm now having regards the values for F / F2...WB / WB2 and B and B2......which all reset to the same values when I press save

screen shot attached

steve

Title: Re: vehicle Turning Simulation
Post by: Lars on April 09, 2016, 06:59:01 PM

Ops! Fixing a problem and adding another. I'm working on it now!

Title: Re: vehicle Turning Simulation
Post by: Lars on April 09, 2016, 09:28:41 PM

Finally fixed, now it should work.

Title: Re: vehicle Turning Simulation
Post by: Steve b183 on April 12, 2016, 05:59:46 PM

lars

all good now thanks

steve b