CadTools and xTurn (Vehicle Turning Software) Forum

CadTools General Category => Civil Corner. => Topic started by: phubb1 on April 22, 2015, 12:20:18 PM

Title: Cross sections
Post by: phubb1 on April 22, 2015, 12:20:18 PM
Hi Lars
When using the cross sections command and selecting a "add display reference line" at the moment you have to pick each line one at a time. Would it be possible to select multiple reference lines with either a window or crossing box ?
Thanks

Peter
Title: Re: Cross sections
Post by: Lars on April 23, 2015, 06:55:57 AM
Hi!

This is by design. I have no plans for extend this but I'll look into it. If itís easy to fix I might consider it.

/Lars
Title: Re: Cross sections
Post by: phubb1 on April 23, 2015, 12:16:30 PM
Thank you.
Title: Re: Cross sections
Post by: toni007 on January 29, 2018, 11:49:45 PM
We realy need that option if its possible :(  Tnx :)
Title: Re: Cross sections
Post by: Lars on February 05, 2018, 10:17:53 PM
I'll give it a try.
Title: Re: Cross sections
Post by: Lars on February 06, 2018, 11:29:50 PM
Now it's fixed!
Title: Re: Cross sections
Post by: phubb1 on February 07, 2018, 09:02:04 AM
Brilliant. A very welcome addition to a great programme.
Title: Re: Cross sections
Post by: toni007 on September 09, 2018, 02:10:05 PM
Is it possible to insert "add display reference lines" in Profile 3D polyline command?
Title: Re: Cross sections
Post by: Lars on September 09, 2018, 07:10:58 PM
Use surface profile, there you can display reference files. The drawback is that you need to create a surface. However you can create a dummy surface of your polyline, offset it and triangulate.