Author Topic: Create Longitudinal Features  (Read 1201 times)

Viach

  • Newbie
  • *
  • Posts: 4
Create Longitudinal Features
« on: November 24, 2017, 04:33:55 AM »
When the Create Longitudinal Features command is used, smoothed corners are formed. What needs to be done to ensure that the corners remain intact?

Lars

  • Administrator
  • Hero Member
  • *****
  • Posts: 546
Re: Create Longitudinal Features
« Reply #1 on: November 24, 2017, 06:21:51 PM »
Hi,

Reduce interval until you are satisfied. Then you can use Cadtools poly line command "weed" to reduce vertices on straight parts of the feature (by settings tolerance). However there is no need to reduce vertices, it is usefully if you are planning to triangulate dense features and want to increase speed.

/Lars

Viach

  • Newbie
  • *
  • Posts: 4
Re: Create Longitudinal Features
« Reply #2 on: September 28, 2020, 05:53:50 PM »
Hi!
Projected slope - 70.00%, slope actual - 70.31%. How to me to be?

Lars

  • Administrator
  • Hero Member
  • *****
  • Posts: 546
Re: Create Longitudinal Features
« Reply #3 on: September 28, 2020, 09:10:44 PM »
Hi,
The resulting slope is based on X and Y components. The resulting slope of your triangle is -70.31%. If you have 2% slope in X direction and 2% in Y direction the resulting slope will be 2,83% ( Sqrt(22+22))

/Lars