CadTools and xTurn (Vehicle Turning Software) Forum

CadTools General Category => Civil Corner => Topic started by: phubb1 on April 22, 2015, 12:20:18 PM

Title: Cross sections
Post by: phubb1 on April 22, 2015, 12:20:18 PM

Hi Lars
When using the cross sections command and selecting a "add display reference line" at the moment you have to pick each line one at a time. Would it be possible to select multiple reference lines with either a window or crossing box ?
Thanks

Peter

Title: Re: Cross sections
Post by: Lars on April 23, 2015, 06:55:57 AM

Hi!

This is by design. I have no plans for extend this but I'll look into it. If it’s easy to fix I might consider it.

/Lars

Title: Re: Cross sections
Post by: phubb1 on April 23, 2015, 12:16:30 PM

Thank you.

Title: Re: Cross sections
Post by: toni007 on January 29, 2018, 11:49:45 PM

We realy need that option if its possible :(  Tnx :)

Title: Re: Cross sections
Post by: Lars on February 05, 2018, 10:17:53 PM

I'll give it a try.

Title: Re: Cross sections
Post by: Lars on February 06, 2018, 11:29:50 PM

Now it's fixed!

Title: Re: Cross sections
Post by: phubb1 on February 07, 2018, 09:02:04 AM

Brilliant. A very welcome addition to a great programme.

Title: Re: Cross sections
Post by: toni007 on September 09, 2018, 02:10:05 PM

Is it possible to insert "add display reference lines" in Profile 3D polyline command?

Title: Re: Cross sections
Post by: Lars on September 09, 2018, 07:10:58 PM

Use surface profile, there you can display reference files. The drawback is that you need to create a surface. However you can create a dummy surface of your polyline, offset it and triangulate.

Title: Re: Cross sections
Post by: toni007 on February 04, 2020, 09:42:47 PM

Hi, Lars. Can you make option for saving reference lines to a file so we can import them later? 

Title: Re: Cross sections
Post by: Lars on February 06, 2020, 06:41:58 AM

It's better to save reference lines in the same drawing as your cross section or surface profile.

/Lars