Author Topic: Annotate cross section (help)  (Read 3912 times)

ish0000

  • Full Member
  • ***
  • Posts: 58
Annotate cross section (help)
« on: January 23, 2019, 04:23:26 PM »
Dear sir,
i need your help

from command lines-> Annotate cross section.

i do not need data in table format.

plz see attach image.

i need data in horizontal & vertical format .

any tips & trick.
plz share

Lars

  • Administrator
  • Hero Member
  • *****
  • Posts: 633
Re: Annotate cross section (help)
« Reply #1 on: January 23, 2019, 05:41:13 PM »
Use "Drafting, Profile/Cross-Section Note" to annotate Elevation and offset from center point.

ish0000

  • Full Member
  • ***
  • Posts: 58
Re: Annotate cross section (help)
« Reply #2 on: January 24, 2019, 05:43:37 AM »
thanks sir, for your good reply.
this cad tools is wonderful for draftsman .
i am become fan..

great tools

offset   elevation            i need it  vertically  below the cross section line.  like i upload the image above.

ish0000

  • Full Member
  • ***
  • Posts: 58
Re: Annotate cross section (help)
« Reply #3 on: January 27, 2019, 09:36:04 AM »
I found under profile /cross section note
for write text vertically  (offset v/h) option.

but u need to point for annotate one by one.
It is possible to select all at time and get text value of point or pline..

Thanks

Lars

  • Administrator
  • Hero Member
  • *****
  • Posts: 633
Re: Annotate cross section (help)
« Reply #4 on: January 27, 2019, 12:06:26 PM »
I'm sorry, but that's not possible

ish0000

  • Full Member
  • ***
  • Posts: 58
Re: Annotate cross section (help)
« Reply #5 on: January 27, 2019, 03:15:52 PM »
ohh, break my heart.

i have a lisp program for polyline of cross section and profile to get text value in form of offset and elevation.
i attched the lisp.

if it suitable to add in cad tool that will be good.

thanks.